dji MAVIC PRO

14
EN
Gimbal
1. Precision elements in the gimbal may be damaged in a collision or
impact, which may cause the gimbal to function abnormally.
2. DO NOT apply external force to the gimbal after the gimbal is powered
on.
3. DO NOT add any payloads to the gimbal, as this may cause the
gimbal to function abnormally or even lead to motor damage.
4. Remove the gimbal clamp before powering on the gimbal. Re-install
the gimbal clamp to secure the gimbal’s position if you are going to
store the aircraft for an extended period.
Compass
To avoid possible serious injury and property damage, observe the
following rule:
1. Land immediately when severe drifting occurs in ight, i.e., the aircraft
does NOT y in straight lines.
Only calibrate the compass when the DJI GO 4 app or the status indicator
prompt you to do so. Observe the following rules when calibrating your
compass:
1. DO NOT calibrate your compass where there is a chance of strong
magnetic interference, such as magnetite, parking structures, and
steel reinforcements underground.
2. DO NOT carry ferromagnetic materials with you during calibration
such as cellular phones.
3. The DJI GO 4 app will prompt you to resolve the compass issue if
the compass is affected by strong interference after calibration is
complete. Follow the prompted instructions to resolve the compass
issue.
Propulsion Systems
To avoid serious injury to yourself or others, which may be caused by
the rotating propellers and motors, observe the following rules: