16
EN
solely responsible for being aware of all relevant regulations and ying
in a way that is compliant.
a. Read and understand the warning messages before using the
Auto-take off and Auto-landing features.
b. Read and understand the warning message and disclaimer before
setting the altitude beyond the default limit.
c. Read and understand the warning messages and disclaimer before
switching between ight modes.
4. Land your aircraft immediately if there is an alert shown on the app.
5. Examine and check all warning messages on the checklist displayed
in the app prior to each ight.
6. Use the in-app simulator to practice your ight skills if you have never
operated the aircraft or if you do not have sufcient experience to be
comfortable operating the aircraft.
7. Beginner Mode is enabled by default when you launch the app for the
rst time. The aircraft’s altitude and ight distance is restricted when
ying in Beginner Mode. We recommend you y in Beginner Mode to
perfect your ight skills. Operate the actual aircraft only after you are
condent that you have mastered adequate ight skills.
8. Cache the map data of the area where you intend to y the aircraft by
connecting to the Internet before each ight.
Firmware
To avoid serious injury to children and animals, observe the following
rule:
1. Keep children and animals at a safe distance during any rmware
upgrade, system calibration, and parameter setting procedures.
1. For safety, always update the rmware to the latest version when an
upgrade notication is shown in the app.
2. Firmware upgrade notications will prompt you to proceed with an
update immediately or to update the rmware within three days. If
you choose to ignore the current rmware update, you are required to
accept the prompted disclaimer. You further understand and agree
that the data including but not limited to ight telemetry data and
user selection records may be uploaded to and maintained on a DJI-
designated server.
3. Be sure to download the rmware package le from the ofcial DJI
website. Verify the rmware package le’s integrity before upgrading.