dji MAVIC PRO

22
EN
b. Flying over highly reective surfaces;
c. Flying at high speeds (over 10m/s at 2 meters or over 5m/s at 1 meter);
d. Flying over water or transparent surfaces;
e. Flying over moving surfaces or objects;
f. Flying in an area where the lighting changes frequently or
drastically;
g. Flying over extremely dark (< 10 lux) or bright (> 10,000 lux)
surfaces;
h. Flying over surfaces that can absorb sound waves (e.g., thick carpet).
i. Flying over surfaces without clear patterns or texture;
j. Flying over surfaces with identical repeating patterns or textures
(e.g. tiles with same design);
k. Flying over inclined surfaces that will deect sound waves away
from the aircraft
6. Camera calibration is required if the aircraft suffers from crashing.
Calibrate the front cameras if DJI GO 4 app prompt you to do so.
TapFly
To prevent serious injury or property damage, observe the following
guidelines:
1. DO NOT instruct the aircraft to y towards people, animals, small
and ne objects (e.g. tree branches and power lines) or transparent
objects (e.g. glass and water).
2. Watch out for potential obstacles in your surrounding area (especially
on the rear, left, and right sides of the aircraft) and stay clear of them
to avoid accidents.
3. Be prepared to take control of the aircraft or press the “STOP” button
on press the “STOP” button on the screen or the Intelligent Flight
Pause button at all times, in case of an emergency of an emergency.
1. There may be deviations between the expected and actual paths for
your TapFly selection.
2. The selectable range on the screen is limited. You cannot make TapFly
selections near the upper or lower edges of the screen.
3. The TapFly mode may NOT function properly when the aircraft is ying
over water or snow covered area.
4. Be extra cautious when ying in extremely dark (< 300 lux) or bright (>
10,000 lux) environments.