Repair Manual Mavic Series
Gimbal stabilization
error
Enter the camera view in the app
and check if the image is skewed or
shaking.
Turn on the motors and check if the
motors are spinning correctly.
Check if the app prompts a “Camera
Sensor Error” warning.
App prompts GPS
disconnected
warning
Check if the app prompts a “GPS
disconnected” warning.
Upper shell cracked
or misshapen
Perform visual inspection and check
if the upper shell is obviously
cracked or misshapen, or if there are
any other cosmetic damages.
Replace the remote
controller.
Lower shell cracked
or misshapen
Perform visual inspection and check
if the lower shell is obviously cracked
or misshapen, or if there are any
other cosmetic damages.
Replace the remote
controller.
Control stick not
centered
Check if the stick input movement
for the remote controller to the
aircraft and the response of the
aircraft are normal.
Calibrate the remote
controller using the app. If
the issue persists, replace
the remote controller.
Check if the remote controller can
be powered on after charging.
Replace the remote
controller.
Remote controller
GPS error
Check if the app prompts a “Remote
Controller GPS Error” warning.
Replace the remote
controller.
Perform visual inspection and check
if the screen is black out or freezes,
and if the screen is not displayed
completely.
Replace the remote
controller (with a built-in
screen).
Battery/charger
outer shell cracked
or misshapen
Perform visual inspection and check
if there are any other cosmetic
damages such as cracked and
Replace the corresponding
defective module.