dji NAZAH - User Manual

©2012 DJI Innovations. All Rights Reserved. 1 |
NAZA HELI
Quick Start Guide
V1.06
2013.03.01 Revision
Please strictly follow these steps to mount and connect the NAZA-H system on your helicopter, as well as to
install the Assistant Software on your computer.
The NAZA-H is very sensitive to vibrations and excessive vibration may impact the normal operation of the
system. If you experience excessive vibration on your helicopter, please adjust the rpm of the main rotor to
reduce the vibration or find other causes for the vibration, and then you can continue to fly.
As DJI Innovations has no control over use, setup, final assembly, modification or misuse, no liability shall be
assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user
accepts all resulting liability. DJI Innovations accepts no liability for damage(s) or injuries incurred directly or
indirectly from the use of this product.
DJI and NAZA-H is registered trademark of DJI Innovations. Names of product, brand, etc., appearing in this
manual are trademarks or registered trademarks of their respective owner companies. This product and
manual are copyrighted by DJI Innovations with all rights reserved. No part of this product or manual shall be
reproduced in any form without the prior written consent or authorization of DJI Innovations. No patent liability
is assumed with respect to the use of the product or information contained herein.
NAZA-H has achieved CE, FCC and RoHS certification.
*This manual is only for basic assembly and configuration; you can obtain more details and advanced
instructions when using the assistant software. To assure you have the latest information, please visit our
website and download the latest manual and current software version.
www.dji-innovations.com

dji NAZAH Specifications

General

Brand	dji
Model	NAZAH
Category	Accessories
Language	English

Summary

Step1 Assembly

R;C System

Main Controller (MC)

Positioning and orientation guidelines for the main controller for optimal wiring and signal.

Swashplate Servo Connections

Optional GPS & Compass Module

Step4 Digital Compass Calibration

Calibration Procedure

Step-by-step guide for calibrating the compass using the control mode switch and helicopter rotation.

Step6 Control Mode Knowledge

Control Mode Overview

Control Mode Operation

Details how stick commands translate to helicopter movements in different modes.

Entering Control Modes

Step7 Test Flight

Test Flight Precautions

Manual Mode Test Flight

Steps for conducting a test flight in Manual Mode and checking controls.

ATTI. Mode Test Flight

Steps for testing the helicopter in ATTI. Mode after successful Manual Mode flight.

GPS ATTI. Mode Test Flight

Steps for testing in GPS ATTI. Mode, including GPS satellite acquisition.

Appendix

Firmware & Assistant Software Upgrade

Detailed procedure for updating the NAZA-H software and firmware online.

LED Indicator Description

Control Mode Indicators

Explains LED behavior for different control modes and GPS satellite status.

Compass Calibration Indicators

Auto Trim Flight Indicators

Other Indicator Statuses

Specifications

Mechanical & Electrical Parameters

Hardware Functions Supported

Software Functions Supported

Performance Parameters

Lists performance metrics like wind resistance, hovering accuracy, and tilt angles for different modes.