OSMO ACTION User Manual
Not nal
6
© 2019 DJI OSMO All Rights Reserved.
Charging Osmo Action
Press the cover release button on the USB-C cover and slide the cover down.
To charge Osmo Action, connect a USB adapter (not included) to the USB-C port using the power
cable (included). The status LEDs are solid red while charging. The battery is fully charged when the
status LEDs turn o.
Charging time: approx. 1 hour 30 minutes (using a USB adapter of 5 V/2 A)*
If charging Osmo Action with the camera frame mounted, it is recommended to detach the USB-C
cover for convenience. To remove, pull the USB-C cover towards the Quick Switch button until it
detaches.
*Charging time is for reference only.
Operation
Button Features
Power Button
To Next Page
Loading...
