143
(2) Type: Variable-type block
(3) Example: Generate reverse display
This allows you to rotate the gimbal manually and observe how the value changes in the FPV window.
Because this is the reverse display, when the gimbal is rotating on the right side of the chassis, the value will
always be negative; when the gimbal is rotating on the left side of the chassis, the value will always be positive.
Note:
Arithmetic calculations cannot be performed on lists.
(1) Meaning: Divide one number by another
(2) Type: Variable-type block
(3) Example: Drift
This will control the robot to drift and pull up.
To Next Page
Loading...
