60
Control the blaster to shoot the infrared beam consecutively within two seconds, four shots per second.
Note:
1) The robot can shoot infrared beam eight times per second at most.
2) This module has no effect on the "Shoot Infrared Beam Once" module.
3) During programming in the laboratory, blast-type operations are not affected by system settings. For
example, in Current setting > Control, infrared beam is chosen for the "blast type". However, during
programming, the gel bead module is used, so gel beads will still be launched when the program runs.
Designs different from the system setting outside the laboratory will not take effect.
(1) Description: Control blaster to shoot infrared beam for only once.
(2) Type: Execution, Blocking
(3) Example:
The launch trajectory light lights up when shooting infrared beam once.
To Next Page
Loading...
