73
(1) Description: Control a specified servo (No.) to rotate at a set speed. If the speed is a positive value, the
servo rotates clockwise; if the speed is a negative value, the servo rotates counterclockwise.
(2) Type: Execution
(3) Example: The servo speed changes along with the direction.
Control the servo to accelerate while rotating clockwise and to decelerate while rotating counterclockwise.
Note:
The servo supports two kinds of control: angle control and speed control. This module is applicable to cases
with a high requirement for speed control of the servo, which will continuously rotate without any positioning
limitations.
To Next Page
Loading...
