dji SPARK Manual

Altitude: is the altitude that the drone will have when it’s reach the waypoint,
(altitude relative to take off point)
the drone will gain or loose altitude progressively from previous waypoint
altitude.
If it’s the first waypoint, the drone will first reach the waypoint altitude (is
currently lower) then it will start moving towards the waypoint
Let’s add more waypoints: (long tap)
as you add more waypoint you will see also draw the path of the mission, and the
distance between the 2 waypoints. (note: units meters or feet are configurable)
Move a waypoint:
To move a waypoint touch it for 0,5 sec to start to “drag” , now you can move it
and drop where you want!

dji SPARK Specifications

Operating Environment

max speed	31 mph (50 kph)
operating temperature	32° to 104° F (0° to 40° C)
charging temperature	41° to 104° F (5° to 40° C)

Camera

sensor	1/2.3” CMOS
effective pixels	12 Megapixels
video recording modes	FHD: 1920×1080 30p

Power

charger input	100-240 V, 50/60 Hz, 0.5 A
charger output	5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity	1480 mAh

Remote Control

operating frequency	2.4G / 5.8G
max transmission distance (Wi-Fi)	100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)	2000 m

Weight and Dimensions

weight	300 g
dimensions	143×143×55 mm