Now add one more waypoint, adding a waypoint next to one that look to a POI,
will automatically set it to the same POI.
please note: Heading Rotation: Lock on POI
when 2 consecutive waypoint have the same “POI”, the heading rotation will be “Lock
on POI” than is different from “progressive”, with progressive the heading will rotate
linearly from the first to the second “waypoint heading”, but in many case (such as a fly
by on a POI) the heading rotation is not linear, “Lock on POI” will allow to keep the POI
in frame during all the path.
Important note: “Lock on POI” is only available with “Continuous Flight” in mission
setting, make sure to choose that!
Using Multiple POI: you can define and use up to 3 POI on each mission
To Next Page
Loading...
