dji SPARK Manual

(View from the iPhone Camera)
Customise the VR view
The View is full customisable to fit all needs, you can adjust the eye width, the vertical position and the
dimension of the views
When the Drone is Landed follow on screen
instruction!
Move the left stick to left to enter edit Mode
Use the Right Stick to adjust vertical position and
eye-width
Use the Left stick to change View dimension and
confirm
-Press the “Fn button” to start/stop the Head-Tracking for camera Tilt
Ta p t h e r e d “ X” to return to close the VR view and go back to the normal piloting screen

dji SPARK Specifications

Operating Environment

max speed	31 mph (50 kph)
operating temperature	32° to 104° F (0° to 40° C)
charging temperature	41° to 104° F (5° to 40° C)

Camera

sensor	1/2.3” CMOS
effective pixels	12 Megapixels
video recording modes	FHD: 1920×1080 30p

Power

charger input	100-240 V, 50/60 Hz, 0.5 A
charger output	5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity	1480 mAh

Remote Control

operating frequency	2.4G / 5.8G
max transmission distance (Wi-Fi)	100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)	2000 m

Weight and Dimensions

weight	300 g
dimensions	143×143×55 mm