djpower FLAME MACHINE HF-210 - Definition of positions; Drive time for Effects

- 9 -
5.4.3. Definition of positions
5.4.4. Drive time for Effects
Time needed for the motor drives from NO.8 to relevant angle:
For example, it takes 90ms for the motor drives from 0°to 45° . When operator design a show to synchronize to music, this drive time must
be taken into account.
10
Pressure Relief
Under DMX control: Channel 6= 0~49 or 201~255.
11
Switch safety
lock to USER
MODE
Before switching to USER MODE, Please strictly follow the safety distance requirement, make sure no
human beings, no animal or no flammable objects are within the danger area.
12
Pressurize
Under DMX control: Channel 6= 50~200.
13
Firing
Under DMX control: Channel 3= 255.
14
Pressure Relief
Relief pressure when show finished or Wave flame machine will not be used for a long period. Under
DMX control: Channel 6= 0~49 or 201~255.
15
Switch safety
lock to TEST
MODE
Guarantee safety use for next time.
16
Power off
Power off Wave flame machine, tear down power cable and DMX cable, pack the device when it is
cooled down.
No.
Angles
Drive time needed
NO.1
-105°
170ms
NO.2
-90°
150ms
NO.3
-75°
130ms
NO.4
-60°
110ms
NO.5
-45°
90ms
NO.6
-30°
70ms
NO.7
-15°
50ms
NO.8
0°
0ms
NO.9
15°
50ms
NO.10
30°
70ms
NO.11
45°
90ms
NO.12
60°
110ms
NO.13
75°
130ms
NO.14
90°
150ms
NO.15
105°
170ms