djpower V-1 - Before Using and Control Buttons; Before Using; Control Buttons

V-1 SPARK MACHINE Art.No.: 118428
9 / 16
4. Before using
Remove before start-up every packing material.
1. After verifying that the unit is intact and complete, please place it on a
level surface.
2. Connect the device to the power supply.
3. The device starts to heat up. This process needs 4 min, meanwhile the
display shows „Heating“.
4. The heating process is finished. The display shows „Ready To Work“.
5. Now you have to fill in the granules. More information for this you can
read on the packing of the granules. You are only allowed to use the
granules of DJ Power.
5. Control buttons
Button Function
MENU Navigation through the menu.
▲
Increase a value or make a setting.
▼
Decrease a value or make a setting.
ENTER Back to the root menu.