To Next PageTo Next Page
Need help?Do you have a question about the DK2 Power OPG777 and is the answer not in the manual?
Details what the 3-year engine and 1-year parts/labor warranty includes for the product.
Lists items not covered by the warranty, such as misuse, normal wear, and consequential damage.
Outlines the steps for a warranty claim, including contacting DK2 and obtaining an RGA#.
Explains how to handle damaged shipments and that DK2 warranty excludes freight damage.
Provides instructions for returns before and after adding fluids, and how to get resolution for defective products.
Directs users to the product's web page for details, photos, videos, specs, and support.
Guides users to the online store for purchasing parts and how to request parts not listed.
Explains how to view the user manual on a mobile device using a QR code.
Defines safety symbols, emphasizes reading the manual, and lists required PPE like goggles and gloves.
Advises to ensure safety decals are attached and readable, and to contact DK2 for replacements.
Covers hazards like slippery ground, enclosed areas, influence of substances, and keeping the work area clear.
Details critical safety for operation, avoiding hazards, and warnings related to repair and maintenance.
Provides precautions for fuel handling, fire prevention, and safe towing procedures for the unit.
Alerts users about chemicals in exhaust and components known to cause cancer or reproductive harm.
Instructs to open, unpack, and inspect all items received with the stump grinder.
Details how to grease axles and install the axle and wheels, noting pin usage for free spinning or braking.
Guides on mounting the handle tower using bolts and connecting wire connectors.
Explains how to secure the throttle cable to the chassis using a provided loop wire clamp.
Describes inserting and securing the tow bar into the chassis's 2-inch pocket.
Lists key engine components and their operational status (Gas, Choke, Switch, Throttle, Pull Starter, Oil).
Provides safety overview for operation and guidance on routine maintenance procedures.
Details the steps for starting the engine and the technique for effective stump grinding.
Offers helpful tips, a quick start guide, and solutions for common operational issues.
Lists recommended actions and actions to avoid for safe and effective operation.
Identifies causes of power loss, such as belt tension issues and loose engine mounting bolts.
A comprehensive list of all parts with their part numbers and specifications.
Visual diagrams showing the assembly of the stump grinder components.
General