DKS 1520 series User Manual

Series 1520
Stand Alone Proximity Card Reader and Weigand Controller
Owner’s Manual
P/N 1520-065 REV C, 5/02
Copyright 2001 DoorKing, Inc. All rights reserved.
DoorKing, Inc.
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
Phone: 310-645-0023
Fax: 310-641-1586
www.doorking.com

DKS 1520 series Specifications

General

Brand	DKS
Model	1520 series
Category	Card Reader
Language	English

Summary

FEATURES

IMPORTANT INFORMATION

PRINTER INFORMATION

SECTION 1 - INSTALLATION

1.1 Dimensions

Physical dimensions of the card reader and controller units.

1.2 1520-080 Card Reader Installation

Step-by-step installation guide for the 1520-080 card reader.

1.3 1520-081 Weigand Controller Installation

Step-by-step installation guide for the 1520-081 controller.

1.4 Memory Chip Installation

Procedure for installing the system's memory chip.

1.5 Terminal Description

Detailed description of each terminal on the 1520 controller.

1.6 Detail Wiring

Comprehensive wiring diagram and connection details.

SECTION 2 - PROGRAMMING

2.1 Master Code

How to set and use the master code for system programming.

2.2 Relay Strike Time

Setting the duration the relay remains activated after a valid code.

2.3 Time and Date

Instructions for setting the system's current time and date.

2.4 Time Zones

Explanation and programming of card and hold time zones.

2.5 Card Code Programming

Programming single or blocks of card codes and their time zones.

2.6 Facility Codes

How to program and enable facility codes for access control.

2.7 Timed Anti-Pass Back

Setup and enabling of the timed anti-pass back security feature.

2.8 Erase Transaction Memory

Procedure to clear the system's transaction buffer.

2.9 Real-Time Print Mode

Configuration for printing transactions in real-time.

2.10 Card Reader Test Mode

Using test mode to verify reader and card functionality.

SECTION 3 - PRINT FUNCTIONS

3.1 Selective Transaction Print

Printing transactions for a specific month and day.