DKS DKGL-S6-1 User Manual

600 Lb. Magnetic Gate Lock
DoorKing Part Number
DKGL-S6-1
It is essential that the surfaces of the armature and the magnetic lock seat perfectly to one another when the gate is in the closed
position. This allows the lock to achieve its maximum holding strength. It is critical the armature is securely fastened to the gate
frame or door, but able to move with the rubber spacer to correctly align with the magnetic lock.
Mount the armature directly to
the gate frame or door. Secure
sexnut through the gate frame
or door into the armature bolt.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Maglock
Armature Bolt
Hexolt
Anti-Tamper
Plug
Optional
Spacer
Washers
Mount to a
stationary
fence post
or
door jamb.
Mount to a
stationary
fence post
or
door jamb.
Installation
Moving
Gate Frame
or Door
Stationary Fence Post
or Door Jamb
Armature
Maglock
Sexnut
Armature
Insert
Roll Pin
Sexnut
Note: Use spacer
washer(s) to shorten
the length of hexbolt
if necessary.

DKS DKGL-S6-1 Specifications

General

Brand	DKS
Model	DKGL-S6-1
Category	Locks
Language	English

Summary

Magnetic Gate Lock Installation

Armature Mounting

Mount the armature directly to the gate frame or door, securing it with the sexnut through the armature bolt.

Maglock Mounting

Mount the maglock to a stationary fence post or door jamb, ensuring proper alignment with the armature.

Wiring the Magnetic Lock System

Transformer and Power Connections

Connect the magnetic lock system to either 24 VDC or 12 VDC transformers, including access control device inputs.

Wiring Protection and Polarity

Install the provided diode across positive and negative lines for surge protection and maintain correct polarity.