To Next PageTo Next Page
Need help?Do you have a question about the DLAB Scientific Instrument MS-H280-Pro and is the answer not in the manual?
General| Model | MS-H280-Pro |
|---|---|
| Work plate dimension | 135 mm |
| Motor type | Brushless DC motor |
| Heating Power | 500 W |
| Stirring positions | 1 |
| Stirring quantity max. | 3 L |
| Speed Range | 100-1500 rpm |
| Temperature Range | Room temp. to 280°C |
| Overheat protection | Yes |
| Temperature display accuracy | ±1°C |
| External temperature sensor | PT1000 (accuracy ±0.5°C) |
| Controll accuracy with external sensor | ±0.5°C |
| Protection class | IP42 |
| Weight | 2.8 kg |
| Permissible ambient temperature | 5-40°C |
| Permissible relative humidity | 80% |
| Type | Magnetic Stirrer |
| Voltage | 100-240 V, 50/60 Hz |
| Stirring Capacity | 3 L |
| Speed display | Digital |
| Temperature display | Digital |
| Safety temperature | 320°C |
Contact Service Department for technical support and warranty claims.
Instrument warranty covers defects in materials and workmanship for 24 months.
Read instructions, use trained staff, caution hot surfaces, ground connection, safe setup.
Avoid splashing, toxic gases, explosive atmospheres, flammable media, overfilling, unsafe containers.
Disconnect power safely, match voltage, secure cable, expert access only, avoid magnetic fields.
Use for labs/factories, observe minimum distances, not for residential use.
Unpack and check for damages. Do not use if damaged.
Identifies probes, LED displays, temperature and speed control knobs.
Controls heating/stirring, displays status, indicates probe, and power switch.
Controls stirring via knob rotation and instrument power ON/OFF.
Shows temperature setting, real value, or 'Hot' status.
Shows speed setting and flashes until target speed is reached.
Verify voltage, ground, connections; set up, observe, and heed operational warnings.
Plug in PT1000, set temp with knob, monitor via LED, control with knob.
Use PT1000 for accuracy, safe circuits, precise control, and sensor placement.
Warns of burns when hotplate > 50°C; displays 'Hot', auto-off below 50°C.
Stirring control via knob for digital/classic models; speed ranges specified.
Troubleshoot power, self-test, speed, and power-off issues; contact support if unresolved.
Clean safely, use recommended agents, prepare for service, store properly.
Lists safety standards (EN, UL, CAN/CSA), EMC standards (EN), and EU guidelines.
Details voltage, frequency, power, motor type, stirring capacity, and magnetic bar size.
Specifies heating power, temp range/accuracy, safe temp, sensor details, and operating limits.
Lists catalog numbers and descriptions for various hotplate stirrer models.
Lists catalog numbers and descriptions for available accessories like sensors and stirrer bars.
