DLab SK-L180-E - LED Digital Model Control

5
4.2 LED Digital Model
Shaking table
Parameter
adjusting knob
Mode switch
button
Speed
display
Time
display
Power switch Power interface
Screws
Items
Default settings
Mode switch button
Mode
Shift speed and time setup mode
Parameter adjusting
knob
Set speed and time by rotating the
knob. Push on/off to start/stop
rotating function.
Speed display
Display the set speed values.
Time display
Display the set time values.
Power switch I/O
Switch ON or OFF the instrument.
Shaking table
Shaking.
Screw
Install the platform.