RESET SETTINGS
Reset Settings allows you to revert back to the factory settings. To do so, press
the dial when on Reset Settings. TransDock micro will ask you if you are sure
you would like to reset your settings. Press the dial once to accept, or turn right
or left to return to the Settings Menu.
Getting the Best Sound Quality with TransDock micro
• Use IntelliTune to automatically find the optimal frequency to broadcast your
Zune over your car’s FM stereo. Then, tune your car’s FM stereo to the fre-
quency displayed on TransDock micro.
• Choosing between Mono and Stereo in Listening Mode: Mono allows for
much better transmitter performance, while Stereo allows for the best sonic
musical performance.
NOTE: If static or distortion increases, switch to Mono for the best transmit-
ter performance possible.
| 13
AUDIO LEVEL
Audio Level
gives you the option of selecting the volume output level that fits
your particular audio. Turn the dial right or left to select from:
Low, Medium
or High.
LISTENING MODE
Listening Mode allows you to choose between Mono and Stereo. TransDock
micro defaults to Mono for optimal transmitter performance. To learn more
about Listening Mode please read Getting the Best Sound Quality with
TransDock micro [pg. 13].
BRIGHTNESS
TIME
Brightness Time allows you to change the length of time that the TransDock
micro’s display screen stays active. Scroll through to select: Always On
,
2 seconds, 5 seconds, 10 seconds, 15 seconds, or 20 seconds.
BRIGHTNESS LEVEL
Brightness Level controls the brightness of the OLED display while TransDock
micro is active. Turn the dial right for higher intensity and left for lower intensity.
DIM LEVEL
Dim Level controls the brightness of the OLED display while TransDock micro is
inactive. Turn the dial right for higher intensity and left for lower intensity or
completely off.
12 | DLO TRANSDOCK MICRO USER GUIDE
To Next Page
Loading...
Need help?
General
