Need help?Do you have a question about the DM Industries Portable Spa and is the answer not in the manual?
General| Brand | DM Industries |
|---|---|
| Model | Portable Spa |
| Category | Hot Tub |
| Language | English |
Guidance on choosing a stable, level surface for spa placement and ensuring proper drainage.
Special considerations for installing the spa indoors, focusing on floor type and humidity.
Guidelines for outdoor spa placement, including building codes and site preparation.
Instructions for connecting the pump suction line, ensuring proper initial setup.
Step-by-step guide to prime the pump for initial operation and water flow.
Procedure to test the Ground Fault Circuit Interrupter for safety before each use.
Overview of the digital control panel, its buttons, and display functions for spa operation.
Explanation of how the auto heat function maintains spa temperature and heating cycles.
Details on operating the spa jets, including therapy modes and jet adjustment.
Information on the automatic filtration cycles programmed into the spa's digital control.
Explanation of how the spa retains temperature settings during power outages.
Procedure to reboot the spa's electronic system to resolve operational issues.
Instructions for regulating air flow to the jets for optimal massage experience.
Guide to customizing jet flow and pressure by adjusting individual jet settings.
How the spa automatically prevents freezing by activating the pump and heater.
System that automatically shuts off the heater if water flow is insufficient.
Mechanism that turns off the pump and heater if the water temperature exceeds safe levels.
Guidance on cleaning, care, and repair of the spa's vinyl liner for longevity.
Steps for cleaning and replacing the spa's filter cartridge to maintain water flow.
Instructions for preparing the spa for winter or extended periods of non-use.
Procedure for emptying, cleaning, and disassembling the spa for storage or maintenance.
Importance of maintaining the correct water level for optimal jet performance and protection.
Daily, weekly, and monthly tasks for proper spa water treatment and upkeep.
Detailed steps for testing and adjusting spa water chemistry (pH, alkalinity, sanitizer).
Procedure to reboot the spa's electronic system to resolve malfunctions.
Troubleshooting steps when the pump is inoperative and the display is off, checking power.
Steps to resolve pump issues when the display is on, checking for software corruption or overheating.
Action to take if the GFCI trips, indicating potential electrical issues.
Explanation of the 'FLO' message indicating insufficient water flow to the heater.
Meaning of the 'HILI' message indicating an overheat condition in the spa heater.
Indication of potential freeze conditions displayed as 'ICE' on the topside control.
Diagnostic code for a non-functional water temperature sensor.
Diagnostic code for a non-functional High Limit temperature sensor.
Detailed steps for removing the control system for servicing.
To Next Page