REPLACING INTERIOR PARTS:
The center pad, the right and the left cheek pads can be removed
for washing.
To remove the center pad you have to pull gently, until the snaps
are unfastened. Be sure to always x the center pad and cheeks
pad prior to riding.
You can clean the inner parts by hand washing them, using
lukewarm water and neutral soap. Do not dry with a clothes dryer
or any type of mechanical dryers.
CAUTION: some helmets are colored with special paints that after time might
decrease in intensity. This must not be considered as a defect but as a particularity
of the helmet. This phenomenon does not compromise the performance of the
product, so we decline every responsibility.
To Next Page
Loading...