Light-UP Dartboard Cabinet
Installation Instruction Manual
CPSIA#2- - -VS
1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.
2. Check inside all parts and cartons before assembling or ordering parts.
3. To make assembly as easy as possible, place all parts in a cleared area and remove the packaging material. Organize all
parts as per parts identifier in the assembly manual. Do not dispose of the packing material until assembly is completed.
4. Avoid scratching dartboard cabinet parts during the assembly process.
5. Assemble product on clean, level and flat surface.
6. Take time to correctly orientate parts exactly as per each assembly diagram.
7. Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
O W N E R ’ S M A N U A L
Please visit our website at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCEON-LINE PARTS REQUESTS
FREQUENTLY ASKED QUESTIONS ADDITIONAL ESCALADE SPORTS PRODUCT INFORMATION
Please Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
Phone: 1-800-467-1421 Toll-Free!
E-mail: customerservice@escaladesports.com
READ ASSEMBLY, OPERATING AND
SAFETY INSTRUCTIONS CAREFULLY!
Mailing Address (correspondence only):
Escalade Sports
817 Maxwell Ave., Evansville, IN 47711
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be found on the
product, packaging, and/or in this Owner’s Manual.
CAUTION:
Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as Manufacturing
defects or missing parts. However, if you have any problems with your new product, please DO NOT RETURN IT TO THE STORE!
First Time Battery Installation:
Locate battery compartment for this product.
Use alkaline batteries for maximum performance.
Using a small Phillips head screwdriver – loosen and remove the battery compartment cover screw(s).
Remove battery compartment cover.
Install new batteries only after reading the “ Battery Information NOTICE“ !
Replace compartment cover and secure cover with the cover screw. Do not over tighten and strip out the screw.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries must be installed / replaced by an adult .
Notice:
1. Remove and replace batteries when the electrical features of this product work slowly or are not functional.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries : Alkaline , Standard ( Carbon-Zinc) , or rechargeable (Nickel-Cadmium batteries).
4. Use Alkaline Batteries for maximum performance.
5. Do not use damaged batteries.
6. Use only batteries of the same or equivalent type as recommended.
7. Install new batteries as per matching the battery polarity guide (+ & - , positive and negative) inside of the battery
compartment. Correct battery polarity installation is critical as to not damage the internal electrical components as well
as insuring the correct functionality of the product.
8. Do not short circuit the battery terminals.
9. Always remove exhausted, leaking, weak, and batteries from long periods of nonuse from the product. Battery leakage
and corrosion can cause damage.
10. Check the battery terminals are clean and bright before installing new batteries.
11. Dispose of old batteries safely and per local battery disposal codes.
12. Do not dispose of batteries into a fire as they may explode or leak.
13. If removable rechargeable batteries are used , they are to be charged under adult supervision.
14. Rechargeable batteries are to removed from the product before they are charged.
15. If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure, and other parts.
Do not use a damaged or malfunctioning charger until it is properly repaired.
16. Non rechargeable batteries must not be recharged.
17. Always remove batteries from this product for extended storage and or non-use.
18. Should this product cause , or be affected by, local electrical interference, move it away from other electrical equipment.
Reset (switching off and back on again and or removing and reinserting the batteries) if necessary.
To Next Page
Need help?
General
