1100XH Installation and Programming Guide | Digital Monitoring Products 1
GET STARTED
The 1100XH Series High Power Wireless Receiver provides up to 100 wireless zones for XR150 Series panels and up to
500 wireless zones for XR550 Series panels. The 1100XHE features 128-bit AES encryption.
The 1100XH provides two-way, supervised communication using 900 MHz frequency hopping-spread-spectrum
technology.
The 1100XH contains additional transmit and receive amplifiers to enable 1100 Series operation at greater distances or
harsh building environments.
The 1100XH is equipped with a case and wall tamper.
Compatibility
▶ XR150/XR550 Series panels
▶ Encryption requires panel Version 183 or higher
▶ 1100T Translator requires receiver firmware Version 207/301 or higher
What’s Included
▶ One 1100XH High Power Wireless Receiver
▶ Model 300 Harness
▶ Hardware pack
Procedure
To install a 1100XH, this guide walks you through these required steps:
1. Program the panel.
2. Select a location.
3. Mount the receiver.
4. Wire the receiver.
To Next Page
Loading...
