Need help?Do you have a question about the DMP Electronics Thinline 7073 and is the answer not in the manual?
General| Brand | DMP Electronics |
|---|---|
| Model | Thinline 7073 |
| Category | Keypad |
| Language | English |
Details the process of separating the keypad front from its base for installation.
Describes wire harness assignments and connections to the keypad bus for proper functionality.
Details the built-in proximity card reader on specific models for HID credentials.
Instructions for connecting external Wiegand output compatible readers to the keypads.
Provides technical specifications for the internal Form C relay used for door strike or magnetic lock control.
Explains the operation of the door strike relay after successful user code verification and door access.
Details how to enable and use the two-button panic key functionality for immediate alerts.
Explains how to enable and use the 7 and 0 keys as a two-button panic feature for alarm activation.
How to adjust the brightness level of the display, LEDs, and keyboard.
How to adjust the tone of the internal speaker for various alerts and key presses.
How to adjust the volume level for key presses and entry delay tone conditions.
Displays the keypad model number and firmware version information.
Displays the current keypad address assigned for panel communication.
Steps to access the Installer Options Menu via the User Options function and entering the code.
Setting the unique address for the keypad to communicate with the control panel.
Configuring the keypad for either Supervised or Unsupervised operational mode.
Setting the starting position of the site code within the Wiegand data string.
Setting the number of characters or bits that constitute the site code.
Selecting the specific action for the relay in degraded mode: OFF, SITE, ANY, or ON.
Performing diagnostic checks on display segments, keyboard backlighting, and testing individual keys.
Testing the functionality of each keypad key to ensure proper operation.
Steps to add proximity credentials to the system using the User Menu and keypad.
How to arm or disarm individual areas using proximity cards or user codes.
Procedures for arming or disarming all system areas or the perimeter.
Operation of the door strike relay for different arming modes and system types.
Lists compatible proximity credentials for specific keypad models.
Lists compatible proximity readers and their associated specifications for use with keypads.
To Next Page
