DMP Electronics Security Command 690 User Manual



INSTALLATION GUIDE
Thinline™ LCD Keypads
Models 7060, 7063, 7070, 7073
Aqualite™ LCD Keypads
Models 7060A, 7063A, 7070A, 7073A
Security Command™ LCD Keypads
690/690F, 790/790F, 693/793

DMP Electronics Security Command 690 Specifications

General

Brand	DMP Electronics
Model	Security Command 690
Category	Keypad
Language	English

Summary

DMP Keypads Introduction

Installing the Keypad

Cover Removal and Harness Wiring

Steps to separate keypad cover and connect wiring harness.

Keypad Features and Specifications

Power, Bus Monitoring, and Card Readers

Additional power supply, bus monitor, and card reader details.

Door Strike Relay and Specifications

Specifications for the door strike relay on specific models.

Advanced Functionality

Zone Features and Panic Keys

Zone 2 Soft-Shunt, Zone 3 REX, and Panic key configuration.

Speaker, Backlighting, and User Options

Configuration and Diagnostics

Text Entry and Installer Options

Methods for text entry and accessing installer options.

Keypad Address and Mode Settings

Custom Card Programming

Card Options and Definitions

Setting card options, Wiegand length, site, and user codes.

Site Code and User Code Configuration

Keypad Diagnostics

Diagnostic Tests

Testing display, keys, zones, and Wiegand input.

Additional Programming Features

Card System Integration

Programming cards and checking credential compatibility.

User Guide: System Operation

Arming and Disarming Procedures

Procedures for arming/disarming system areas and perimeter.

Door Strike and Entry Delay Operation

Wiring and System Specifications

Wiring Guidelines and Device Limits

Specifications for keypad bus wiring, distance, and device limits.