Need help?Do you have a question about the DMP Electronics 9060 and is the answer not in the manual?
General| Brand | DMP Electronics |
|---|---|
| Model | 9060 |
| Category | Keypad |
| Language | English |
Details how to enable and use the two-button panic key functions for emergency reports.
Explains how the backlit logo indicates armed status, power, and battery status.
Steps to perform an RF survey to test wireless communication before installation.
Step-by-step instructions on how to separate the keypad cover from its base.
Guidance on mounting locations and securing the keypad, ensuring tamper switch contact.
Information on connecting the DC power supply and its function.
Details the standby battery's role, capacity, and low battery indication.
Explains how to program wireless keypads to the control panel using pairing.
Steps to enable wireless keypad pairing mode at the keypad itself.
How to access and navigate the Device Setup menu for keypad configuration.
Entering the total number of bits for Wiegand code, including parity bits.
Steps to program a proximity credential or enter a user code into the keypad.
Performing keypad diagnostics and testing individual keys for proper operation.
Steps to remove the keypad PCB and replace the internal rechargeable battery.
States compliance with Part 15 of FCC Rules and operational conditions.
States compliance with Industry Canada license-exempt RSS standards and RF exposure limits.
To Next Page
