Chapter 3 17
The QS3 has a low alarm that alerts the operator when a measurement
falls below the value set for the low alarm.
Touch on Alarms to open the alarm menu options.
Touch on Low to open the numbers
editor where you can set the low alarm value
using the cursor keys.
Touch to save and return to the previous
menu.
Figure 3.5: Alarms menu options
Any of the following alarm types can be selected:
Beep : Audible intermittent alarm type.
Screen : Visible alarm that causes measurements to be displayed in
dotted instead of regular numbers.
Light: : Visible alarm that activates the display backlight illumination
causing it to flash.
To Next Page
Loading...