18 Chapter 3
Select Memory from the main menu to view all memory menu
options. The options in this menu will be different depending on your
QS3 model. In the QS3 B stored values can be viewed on the unit
display but they cannot be sent to a PC or a printer. Values can only be
sent to a PC via USB with the QS3 DL using DataCenter software.
Figure 3.6: Memory menu options based on unit model
In the QS3 DL memory menu touch on Connect to enter the
waiting to connect to PC mode.
Touch to exit and cancel the connection.
Figura 3.7: Connecting to PC
To Next Page
Loading...