The DMR MiniWash is a portable mini washing machine designed for convenience and efficiency. It is available in two models: DMR 30-1208 and DMR 46-1218, catering to different capacity needs.
Function Description:
The DMR MiniWash is a compact, single-tub washing machine that performs washing, rinsing, and spinning functions. It is designed to handle small to medium loads of laundry, making it suitable for individuals or small families. The machine features a top-loading design with separate compartments for washing and spinning. It utilizes a simple control system with a timer for washing and spinning cycles. The washing process involves filling the tub with water and detergent, placing clothes inside, and setting the wash timer. Rinsing is performed by draining the wash water and refilling with clean water, followed by a rinse cycle. The spin function removes excess water from clothes, reducing drying time.
Important Technical Specifications:
| Technical Specifications |
DMR 30-1208 |
DMR 46-1218 |
| Washing Capacity |
3.0 Kg |
4.6 Kg |
| Spinning Capacity |
1.5 Kg |
2.0 Kg |
| Motor Power |
240 W |
240 W |
| Ac Input |
220V / 50Hz |
220V / 50Hz |
| Outer Dimension |
395395540 mm |
450415660 mm |
| Weight |
6.7 Kg |
9.0 Kg |
Usage Features:
Step 1 - Washing:
- Place the tub on a level surface near a drainage point.
- Open the top cover and turn the spin basket clockwise to release and remove.
- Clip the water drainage tube to the right side.
- Place clothes in the washing machine.
- Plug in the washing machine.
- Fill with warm water, via the water inlet or directly into the tub, up to the jug level (not exceeding 40 degrees Celsius for woollen fabrics).
- Add regular washing powder. The quantity of powder should be decided per wash load size. Use similar powder quantity that you use for hand washing of the same load.
- Turn the wash time to the desired setting.
- When the wash ends, release the drainage tube and drain water into a sink or suitable container.
Step 2 - Rinsing:
- Clip the drainage tube to the side of the machine.
- Re-fill the tub with clean water to the same level.
- Turn the dial to the desired time.
- When the cycle has finished, release the drainage tube and drain water.
- Repeat the above process if necessary.
- Leave the drainage tube in the released position.
Step 3 - Spin:
- Place wet clothes into the spin bucket, splitting the load if necessary (do not overload the basket).
- Place the plate over the clothes and press down to secure.
- Place the spin bucket into the tub, turn anti-clockwise and click into position.
- Turn the dial to spin and for your desired time.
Thermostat Enabled:
The DMR Mini Washing Machine is equipped with a thermostat to protect the motor from overheating. In case the machine overheats due to any reason (e.g., used for very first time, continuously used for more than 3-4 times, overloaded, less water is used, power fluctuation, or any other reason), the machine will automatically stop functioning. In such cases, keep the machine switched off for 60 minutes. After the cooling period of 60 minutes, you can operate the machine. It will start functioning.
WARNING! ELECTRICAL ITEM, PROTECT FROM RAIN AND WATER, DO NOT IMMERSE.
- Water is not to enter the inner part of the machine directly, to protect the electric motor.
- When removing the plug from the socket, ensure hands are dry.
- To avoid plastic deformation, do not place heavy goods or hot objects on the unit.
- Do not use excessive amounts of washing powder, this will affect washing.
- Water must never exceed 55 degrees.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid hazard.
- This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Keep the machine away from direct sunlight and heating appliances.
- If there is an excess amount of water in the tub, it will overflow.
- Fast colour washings should be washed separately.
- For washing woollen garments, please use a washing net bag and wash garments on their reverse side.
Maintenance Features:
General Maintenance:
- When cleaning the housing of the machine, wipe it thoroughly and wipe out dirt. When the unit is very dirty, please use a neutral liquid soap to clean.
- Store in a cool, dry place.
Troubleshooting:
- Water draining while washing: Keep the outlet pipe hanged up while washing.
- Vibration:
- If the spin basket is not properly fixed, check the basket fitment and click it into position.
- If there is excess clothing weight, follow the recommended weight and offload some weight if necessary.
- If the machine is not on a flat surface, keep the machine on a flat and non-slippery surface.
- If there is an imbalance of cloth in the spin basket, ensure to put clothes in a balanced way in the spin basket.
- Machine Movement while operation:
- If there is unusual vibration due to overloading/improper fixing of the basket, check the basket fitment, cloth loading, and properly fit the basket/offload some cloth weight.
- If kept on a relatively high slippery/inclined surface, keep the machine on a flat surface. Wet the rubber foot for better adherence.
- Spin basket getting out:
- If the basket is not properly fit, check the basket fitment and click it into position.
- If there is an overloading of clothes, follow the recommended weight and offload some clothes if necessary.
- If there is an imbalance of cloth in the spin basket, ensure to put clothes in a balanced way in the spin basket.
- If the operation process is not properly followed, refer to the operation instruction manual for the appropriate method.
- Water inlet hose faucet is not fitting to the tap: An appropriate adaptor/connector may be procured from the market. It's an optional accessory and water can be poured manually from the top.
- Cloths remaining wet after spinning:
- If the outlet pipe is hanged while spinning, keep the outlet pipe down while spinning.
- If there is an imbalance of cloth in the spin basket, ensure to put clothes in a balanced way in the spin basket.
- If a lesser time is set for spinning, spin the clothes for 6-9 minutes for better results.
- If there is overloading/excess clothes put than recommended weight, follow the recommended weight and offload some clothes if necessary.
- Machine working slow:
- If there is overloading of clothes than recommended weight, follow the recommended weight and offload some clothes if necessary.
- If there is a lesser water level, use an adequate water level for free movement (floating) of clothes while washing.
- Machine Not Working:
- If there is a power failure, check for power supply.
- If the power cord is not inserted properly, insert the power cord properly/try at a different plug point/socket.
- If overheating caused cutoff (i.e., thermostat is activated), wait for a cooling period of 60 minutes (refer to the operation instruction manual for the Thermostat Feature).
Content Per Box:
- 1N Main Unit (Washing Machine)
- 1N Spin Basket
- 1N Spin Basket Cover Plate
- 1N Inlet Pipe
- 1N User Cum Warranty Manual
For further assistance, you can contact Lakshmi Electronics, B3, 505, Anita Residency, Katraj-Kondhwa Road, Opp Indian Oil Pump, Katraj, Pune - 411046 (India) at Customer Care Number - 77759 11000 / 77758 11000 / 86059 11000 or visit www.dmr-india.com.
To Next Page
Need help?
General