DMtex D9000 SR - User Manual

ISO 9001:2008 Certified Company
№ 34, етаж 5,
Tel./Fax: 064 801 597
e-mail: office@dm-teh.com
web: www.dm-teh.com
Address: Pleven, Bulgaria 5800
ул.”Ген.л-т Ат. Стефанов”
Installation and operation conventional fire detectors
D9000 series
Nom.№
Type
Characteristics
Sensitivity / Class
1001
D9000 SR
Optical smoke detector
EN 54-7
1002
D9000 T / A1R
Rate of rise heat detector
A1R, EN 54-5
1003
D9000 T / A1S
Fixed temerature heat detector
A1S, EN 54-5
1004
D9000 MSR
Combines optical smoke and heat detector
A1R, EN 54-5 / EN 54-7
Caution : Read this manual before attempting to install the detector.
1. Technical specifications
– Supply voltage 9-30 V DC
– Power consumption in Duty condition ≤ 130 µА
– Consumption in " Fire " condition 20 mА/ 24V DC
– limiting resistor output 2kΩ
– Degree of protection IP 40
– Cross section of the connecting wire 0,4÷2,0 mm2
– Operating temperature range 10ºС ÷ 50ºС
– Humidity (93 ± 3)% при 25ºС
– Dimensions with base f 100mm h ≤ 52mm
– Weight ≤ 100g
– Mounting the detector
– Choose the place (according to the plans of the project) for the installation of the detector ;
– Mount the base with appropriate fixings ;
– Connect the electrical cables according to the attached diagram ( Figure 1) ;);
Fig.1
– Place the detector base and rotate clockwise till matching markers;
– If you want to lock detector ::
 Pre remove the key from the base ( Figure 2).
 Break the plastic at the specified location on the bottom of the sensor ( Figure 3 ).

Summary

Technical Specifications

Detector Specifications

Details electrical and physical characteristics of the D9000 series detectors.

Mounting the Detector

Instructions for selecting placement and fixing the detector base.

Testing and Maintenance

Testing Procedure

Steps to test detector functionality using power and test spray/sonda.

Service Maintenance

Guidelines for annual visual inspection, performance verification, and cleaning.

Available Base Types

Details the three available base types for D9000 Series detectors.

Warranty Obligations

Warranty Terms and Repairs

Outlines warranty period, conditions, and procedures for repair services.

DMtex D9000 SR Specifications