Need help?Do you have a question about the DNT DigiMicro Profi II and is the answer not in the manual?
General| Type | Digital Microscope |
|---|---|
| Interface | USB 2.0 |
| Sensor Type | CMOS |
| Frame Rate | Up to 30 fps |
| Software Compatibility | Windows, Mac |
| Light Source | 8 LED |
| Focus Range | Manual focus |
Describes general safety precautions and usage advice for the device.
Covers conditions to avoid and handling technical issues to prevent damage.
Advises on packaging safety and periodic cleaning for optimal performance.
Lists the necessary hardware and operating system for the device.
Details and illustrates the components included in the delivery package.
Identifies and labels components visible on the left side of the microscope.
Identifies and labels components visible on the right side of the microscope.
Illustrates the initial steps for assembling the microscope stand.
Details securing the microscope to the assembled stand.
Explains using wheels for rough focus adjustment of the microscope.
Describes how to achieve precise focus using a wheel.
Guides through installing the driver and software application.
Introduces the MicroCapture Plus software interface and its layout.
Explains file directory settings, program exit, and general options.
Covers photo/video capture, preview size, and fullscreen mode.
Details the timer function and video recording process.
Introduces basic image editing and calibration procedures.
Explains how to use drawing tools like lines, arrows, and text.
Describes how to perform various measurements on captured images.
Provides detailed technical parameters of the DigiMicro Profi II.
States compliance with relevant EU directives and regulations.
Instructions on proper disposal of electronic equipment at the end of its life.
Provides hotline, email, and service hours for customer support.
Outlines general warranty conditions, exclusions, and claim procedures.
To Next Page
