TNS-1724 SWITCH 蓝牙手柄操作说明
TNS-1724 SWITCH Bluetooth handle operation manual
Product name:SWITCH Bluetooth handle
非常感谢你选用该款Switch/安卓游戏手柄.请在使用前，详细阅读本手册，以便正确操作使用，更好的发挥产品优
越性能。本手册中的说明基于设备的默认设置;本手册中的所有图片,陈述及文字信息仅供参考,请以实际产品为准。
如有内容更新恕不另行通知。这些更新会重新编入新版手册中,本公司保留最终解释权。可用功能和附加服务可能因
设备,软件或服务提供商而异。如果有印刷错误或翻译失误望广大用户谅解。
Thank you very much for choosing the switch / Android game handle. Please read this manual carefully before you use it
so that you can use it correctly and give full play to the superior performance of the product. The instructions in this manual
are based on the device's default settings; All pictures, statements and written information in this manual are for reference
only. Please refer to the actual product. Content is subject to update without prior notice. These updates will be
reprogrammed in the new edition of the manual, the company reserves the right of final interpretation. Available features
and additional services may vary depending on the device, software, or service provider. If there is a print error or a
translation error, it is expected to be understood by the vast number of users.
1.该产品主要用于Switch游戏主机，兼容安卓系统的手机,平板，电视,TV BOX，平板等带蓝牙功能的设备.
1.The product is mainly used for Switch game console, compatible Android mobile phone, tablet, TV box, tablet and
other devices with Bluetooth capabilities.
2.该手柄由15个数字按键（UP，DOWN，LEFT，RIGHT，A，B，X，Y，L1，L2, R1,R2，L3，R3，SELECT，
2. The handle consists of 15 digital buttons, （UP，DOWN，LEFT，RIGHT，A，B，X，Y，L1，L2, R1,R2，L3，
R3，SELECT，START，HOME and two simulated 3D rockers.
II. Description of operations:
1、把主机的(System Setting ->Ariplane Mode off。
1. Make the host system Setting-> Ariplane Mode off.
2、在主机主页面选择Controllers ->Change Grip/Order，让主机处于搜索蓝牙设备状态。(回连不需要此操作)
2. Select Controllers-> Change grip / order on the host main page to make the host in the state of searching Bluetooth
device.(The operation does not need this operation)
3、注意：若主机很难配对手柄，有可能是主机连接了太多的蓝牙设备，需要手动清除蓝牙信息（System
Setting->Controllers and Sensors->Disconnect Controllers）；
3. Note:If the host is difficult to match the handle, it may be that the host is connected to too many Bluetooth devices and
needs to manually clear the Bluetooth information(System Setting->Controllers and Sensors->Disconnect Controllers);
4. Handle Switch mode pairing Switch host:
To Next Page
Need help?
General