DOBE TY-1803 - User Manual

Product Introduction:
1
This product is a Bluetooth controller receiver, is suitable
for wireless controller connection to the console. Insert
the receiver into the PC or N-S console base, and when it
receives the Bluetooth controller signal you can play the
controller. One receiver can only be connected to one
Bluetooth controller. Once successfully connected, the
transparent light guide will emit blue light. Besides, it can
be automatically reconnected again next time. This
product is strong in connection compatibility, small and
portable, simple and convenient to use.
User Manual
Product No.: TY-1803
Code Button
USB male port
Transparent
light guide
Version Number: A0
1. Code Button: It is used to switch the light display to
inform the receiver of the mode and state at this time.
When the product is inserted into the device, the LED
light flashes slowly, indicating that the product is in the
tie-back mode. At this time, press the button and the
product will enter the Bluetooth device pairing mode.
During the pairing, the transparent light guide at the end
of the product will be display light.
2. Transparent light guide: The light guide color is blue.
There are several different LED lighting modes according
to the working status.
Function Introductions:
3
Product Pictures:
3
2

Summary

Product Introduction

Overview and Features

This product is a Bluetooth controller receiver, suitable for wireless controller connection to the console. It is small, portable, simple and convenient to use.

Product Pictures

Receiver Component Diagram

Illustrates the USB male port, code button, and transparent light guide of the receiver.

Function Introductions

Code Button Usage

Used to switch light display for mode/state. Press to enter Bluetooth pairing mode.

Transparent Light Guide

Displays blue light and various LED modes according to working status.

LED Indicator Status Meanings

Details slow blinking (not connected/tie-back), fast flashing (pairing), and steady on (connected).

Compatible Platforms and Devices

Supported Platforms and Modes

PC (X-input default), Android TV box, N-S Console base.

Compatible Controller Models

P-4, P-5, X-One S/X (specific version), N-S Pro controllers.

Multi-Receiver Support

One receiver per controller; multiple receivers can connect to PC/N-S console.

Instructions for Bluetooth Connection of Receiver

General Pairing Procedure

Turn on controller, plug in receiver, press receiver code button to pair.

P-4 Controller Pairing Guide

Hold SHARE+PS on controller, then press receiver code button.

X-One S;X Controller Pairing Guide

Wake controller, hold pairing button, then press receiver code button.

P-5 Controller Pairing Guide

Hold SHARE+PS on controller, then press receiver code button.

N-S Pro Controller Pairing Guide

Press Pro controller pairing button, then press receiver code button.

Technical Parameters

Device Specifications Overview

Working Voltage: DC 5V, Current: ≤40mA, Bluetooth Version: 5.0, Distance: 8-10m.

Notice

General Usage and Safety Precautions

Ensure controller battery, avoid impact, chemicals, magnetic fields, and heat.

Connection and Platform Specifics

Enable wired connection for N-S, use Steam for PC, note vibration/gyro support.

Mode Switching

Switch between X-input and D-input modes by holding PS(HOME) button.

DOBE TY-1803 Specifications

General

Category	Receiver
Model	TY-1803
Input Voltage	DC 5V
Frequency Response	20Hz - 20kHz
Bluetooth Version	5.0
Bluetooth Range	10m
Supported Profiles	A2DP, AVRCP
Audio Input	3.5mm AUX