Contents/Precautions
7
◆
Handling docomo nano UIM card
CAUTION
Be careful of the cut surface when removing
docomo nano UIM card.
May cause injuries.
◆
Handling mobile phones near
electronic medical equipment
WARNING
Wearers of medical equipment such as
implanted pacemakers or defibrillators must
carry and use the terminal at least 15 cm away
from the implanted device.
The terminal's signals may affect the performance of
electronic medical equipment.
When electronic medical equipment other than
implanted pacemakers or defibrillators are in use
outside of medical facilities (such as in home care
settings), check with the device manufacturer to
determine how the device is affected by
electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.
When you are in a crowd etc. and you have
difficulties to keep a distance of 15 cm or more
from others, turn the airplane mode on or power
off the terminal not to transmit signals.
There may be wearers of medical equipment such as
implanted pacemakers or defibrillators around you.
The terminal's signals may affect the performance of
electronic medical equipment.
When using the terminal in a medical facility, be
sure to observe the regulations of the facility.
◆
Material list
Do
Do
Do
Do
Do
Part
Material/Surface
treatment
Display panel Hardened glass
Exterior case Front case PA-GF resin/Acrylic
UV curable coating
Back case PC+ABS-GF resin/
Acrylic UV curable
coating
Back cover
PC-GF resin
＋
polyester elastomer
resin/Acrylic UV
curable coating
Receiver panel ABS resin/
Discontinuous
evaporated
Home key PC resin/
Discontinuous
evaporated+Serigraph
1Seg antenna Top section PC+ABS resin
Pipe section Stainless steel
Root flexure
section
Nickel titanium alloy
Root rotating
section
Stainless steel/Nickel
plating
Out-camera/
Infrared data port
Panel Acrylate resin
Power key, Volume key Aluminum alloy/
Alumite coating
One-touch buzzer switch POM resin
External connection jack cap
PC resin
＋
polyester
elastomer resin/Acrylic
UV curable coating
Charging jack
PC resin
＋
ABS resin/
Gold plating
Battery Pack F35 Body PC resin
Contacts Beryllium copper/
Gold plating
Label PET/Black print letter
Desktop Holder
F46
Upper and
lower case
ABS resin
Spacer (L/R),
Front hook,
Side lever,
Charging
terminal (lever)
POM resin
Charging
terminal
(Contacts)
Phosphor/Gold
plating
Rubber part Polyurethane
External
connection jack
Stainless steel/Tin
plating
To Next Page
Loading...