8
Getting Started
3. Turn On Your Vehicle.
4. Select Language
5. Turn off recording.
In most vehicles this will send power to the outlet and automatically turn on your camera. In some
vehicles the power outlet is continuously powered even when the vehicle is off.
Upon powering up the camera for the first time, use the arrow keys located on the left side of the
LCD Screen and select the language of your choice. Press the “record/select” button found on
top of your unit to confirm your selection.
In order to access the menu to setup the time and date you will need to turn off the
recording. Press the “record/select” button. You should no longer see a flashing red
dot on the screen.
To Next Page
Loading...