17
Camera Settings
G-Sensor
The G-Sensor measures shock forces. The
settings from “low to high” determine the
amount of force needed to lock the file from
being overwritten.
Recommended Setting: Low
Image Rotation:
Rotates the recorded image 180°. Used if
the camera is mounted on the dashboard.
Loop Recording
If loop recording is set to 2/3/5 minutes,
video recordings of that length will be
created. When the memory card is filled the
oldest files will be overwritten (excluding
locked clips). Turning off loop recording
will prevent the camera from writing new
files when the memory card is filled.
Motion Detection
For use when parked not when driving.
Saves memory space by only recording
when motion is detected. Motion detection
must be manually disabled before driving.
If motion detection is activated while driving
you may have significant gaps in the
recorded video.
Speed Units:
Select Metric or Imperial units.
Standby Speed Display
After a customized period of time a new screen
will appear showing speed and a compass
showing your direction. The GPS speed warning
if enabled will appear on this screen.
WDR (Wide Dynamic Range)
Cannot be changed. Shows WDR processing is
enabled.
White Balance
Sets the white balance.
Recommended Setting: Auto
World Time Zone
Sets the current time zone for GPS time and date
calibration. Note the time zone must be manually
adjusted for daylight savings.
To Next Page
Loading...