To Next PageTo Next Page
Need help?Do you have a question about the DOD RTA Signal Processors and is the answer not in the manual?
General| Brand | DOD |
|---|---|
| Model | RTA Signal Processors |
| Category | Signal Processors |
| Language | English |
Covers electrical shock, fire risk, and general handling of the equipment.
Specific safety advice for UK mains plugs, including disposal.
Safety notes for European customers, emphasizing earthing and proper wiring.
Defines a real-time audio analyzer and its uses in audio measurement.
Details the DOD RTA Series II features, spectrum display, and included microphone.
Describes the connections and functions available on the rear panel of the RTA.
Provides general guidance on using the RTA for audio system analysis and equalization.
Introduces the DOD 834/835 stereo/mono crossover networks and their design.
Explains the benefits of using multi-amplified sound systems with crossovers.
Outlines basic setup procedures for stereo and mono operation of the crossovers.
Specific setup steps for stereo mode, including gain and filter settings.
Using the crossover for stereo output with a mono subwoofer, including level settings.
Specific setup steps for mono mode, following bottom panel markings.
Details the technical specifications for the 834 crossover model.
Describes the features of the DOD 844 Series II 4-channel noise gate.
Instructions for rack mounting and connecting the 844 noise gate.
Overview of the DOD 866 Series II stereo gated compressor/limiter.
Guidance on installing and connecting the 866 unit in a rack.
Explains how to use the Stereo Link switch for synchronized compressor operation.
Covers techniques like ducking, de-essing, and de-thumping using side chain inputs.
