Need help?Do you have a question about the DOD SR 834 and is the answer not in the manual?
General| Input Connectors | XLR |
|---|---|
| Output Connectors | XLR |
| Engine | Not applicable |
| Horsepower | Not applicable |
| Torque | Not applicable |
| Transmission | Not applicable |
| Drivetrain | Not applicable |
| Fuel Economy (City) | Not applicable |
| Fuel Economy (Highway) | Not applicable |
| Seating Capacity | Not applicable |
| Cargo Volume | Not applicable |
| Curb Weight | Not applicable |
General safety precautions regarding electric shock, moisture, and internal hazards.
Specific safety warnings and regulations for U.K. mains plugs and fuses.
Conditions for proper operation and avoiding interference for electromagnetic compatibility.
Guidance on safe wiring practices, color coding, and grounding connections.
Overview of DOD SR834/SR823 models, Linkwitz-Riley filters, and Butterworth filter.
Benefits of using separate amplifiers for each frequency band for efficiency and sound quality.
How multi-amping improves power handling, reduces cost, and simplifies portability.
Steps for installing the crossover in a rack and connecting power safely.
Instructions for connecting audio input and output lines using XLR and 1/4" phone connectors.
Detailed wiring standards for balanced and unbalanced XLR connections, including pin assignments.
Specifications for connecting 1/4" phone plugs for balanced and unbalanced audio signals.
Crucial safety warning to not power on amplifiers before setup is complete.
Steps for labeling amplifiers, setting volume controls, and applying power to the system.
Detailed steps for setting up stereo operation, including gain, level, and frequency controls.
Explanation of the ÷10 and Range switches for adjusting crossover frequency ranges.
Connecting amplifier outputs and setting level controls for each frequency band.
Guidelines for using phase inversion switches to correct phase problems safely.
Setup procedure for stereo operation using a single mono subwoofer output.
Procedure for setting up the crossover for mono operation, including frequency ranges.
Important warnings regarding switches and the usability of the LF SUM output in mono mode.
Details on SR823/SR834 configurations, filter types, slopes, and frequency ranges.
Specifications for inputs and outputs, including connectors, maximum levels, and impedance.
Performance data including THD+Noise, Dynamic Range, Hum & Noise, and frequency response.
Details about the manufacturer, product names, and options declared for conformity.
Confirmation of compliance with relevant Safety (EN 60065, IEC 63) and EMC (EN 55013, EN 55020) standards.
Information on compliance with European Low Voltage and EMC Directives.
To Next Page