EasyManua.ls Logo

DOD SR231Q User Manual

DOD SR231Q
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GRAPHIC EQUALIZER
SR231
Dual 31-Band Constant Q Equalizer
The DOD SR231Q is a powerful 2 rack space
stereo/dual mono 31-band graphic equalizer of
uncompromising quality, performance, and features.
It allows the user to see a graphic representation of
equalization applied to the audio spectrum of a
sound source, and offers the flexibility to provide
solutions to many EQ problems. The SR231Q offers
up to 12 dB of cut or boost per band, and switch-
able low cut filters for each channel. Electronic fil-
ter switching minimizes transients (loud pops or
clicks when the switch is depressed), and up to
±12 dB of level control is available to compensate
for gain changes due to equalization boost or cut.
Constant Q constant bandwidth from each filter
throughout the full audio spectrum. The SR231Q
can be used as a stereo equalizer or as two inde-
pendent channels of equalization, providing maxi-
mum flexibility for all sound systems. Connections
to the SR231Q may be either impedance balanced
(1/4" tip-ring-sleeve phone plug) or unbalanced
(mono 1/4" phone plug) with XLR connectors avail-
able as a factory option.
Low Cut Filter: 12 dB/octave rolloff, 3 dB down @ 50 Hz,
switchable in or out.
Frequency Response: 20 Hz-20 kHz, ±0/-0.5 dB.
Frequency Center Tolerance: 5%.
Slider Control Range: 12 dB cut/boost.
Input Impedance: 40k balanced, 20k unbalanced.
Maximum Input Level: +21 dBu.
Output Impedance: 102 balanced, 51 unbalanced.
Maximum Output Level: +21 dBu.
Input Gain Control: ±12 dB.
Harmonic Distortion: 0.004% at 1 kHz typical.
Signal-To-Noise Ratio: Greater than 90 dB.
Note: 0 dBu = 0.775 Vrms.
Input Common Mode Rejection: >75 dB@60Hz
SPECIFICATIONS
31 1/3 Octave Standard ISO Center
Frequencies Bands per channel
• Constant Q Filter
• 12dB of Boost/Cut per Band using Low
Noise Potentiometers
• LED Bargraph Level Indicators
• Low Cut and EQ In/Out Switches with
LED Indicators
• Balanced/Unbalanced input and
impedance bal/unbal outputs for each
channel
• Front Panel Power Switch
• 1/4" Phone connectors (XLR Optional)
• 2 Unit Rack Space
• One Year Limited Warranty
A Harman International Company
8760 South Sandy Parkway, Sandy, Utah 84070 • (801) 566-8800 • Fax (800) 333-7363 • Int'l Fax (603) 672-4246 • Visit DOD on the World Wide Web at www.dod.com
GRAPHIC EQUALIZER
SR231
Question and Answer IconNeed help?

Do you have a question about the DOD SR231Q and is the answer not in the manual?

DOD SR231Q Specifications

General IconGeneral
BrandDOD
ModelSR231Q
CategoryStereo Equalizer
LanguageEnglish

Summary

DOD SR231Q Graphic Equalizer Overview

Product Description

Powerful 2 rack space stereo/dual mono 31-band graphic equalizer offering 12 dB cut/boost per band and switchable low cut filters.

Key Features

Highlights include 31 ISO center frequencies, Constant Q filters, LED indicators, EQ In/Out switches, and low noise potentiometers.

Specifications

Low Cut Filter

12 dB/octave rolloff, 3 dB down @ 50 Hz, switchable.

Frequency Response

20 Hz-20 kHz, ±0/-0.5 dB.

Input/Output Characteristics

Details on input impedance, output impedance, maximum input/output levels, and gain control.

Performance Metrics

Harmonic Distortion, Signal-To-Noise Ratio, and Input Common Mode Rejection.

Architect & Engineer Specifications

SR231Q Block Diagram

Schematic illustrating signal flow including RFI filter, low cut, input gain, 31-band EQ, and output level meter.

General Design and Safety

Describes construction, power supply isolation, safety compliance, rack-mountability, and optional security cover.

Related product manuals