Dodge 2007 DR Ram - Rear Light Bar ID Marker (Dual Rear Wheel) - if Equipped

2. Turn socket
1
⁄ 4 turn counterclockwise to access the
bulb.
3. Pull bulb straight out from socket.
4. Reverse procedure for installation of bulbs and hous-
ing.
Rear Light Bar ID Marker (Dual Rear Wheel) – If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket 1/4 turn counterclockwise to access
the bulb.
510 MAINTAINING YOUR VEHICLE