CAUTION!
•
When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in a electrical system
failure.
•
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage
rating. The use of a fuse with a rating other than
indicated may result in a dangerous electrical
system overload. If a properly rated fuse contin-
ues to blow, it indicates a problem in the circuit
that must be corrected.
REPLACEMENT LIGHT BULBS
LIGHT BULBS — Interior Bulb No.
Dome Light ........................ WL212–2
Liftgate Lamp ........................... 567
Overhead Console Lights ............. PLW214–2A
Reading Light ....................... WL212–2
LIGHT BULBS — Outside Bulb No.
Headlight .......................... 9008 H13
Front Park/Turn ...................... 3157AK
Front Sidemarker......................... 168
Back-Up ............................. 4057K
Center High Mounted Stoplight .............. 921
Fog Lamp.......................... H109145
License Plate Light ....................... 168
Rear Tail, Stop, Turn Signal................ 4057K
378 MAINTAINING YOUR VEHICLE
To Next Page
Loading...
