100
Controls in detail
Operating system with steering wheel buttons*
3
Selecting the language
Select the
Inst. cluster
submenu us-
ing the æ or ç button.
Press the j or k button repeat-
edly until you see the
Language
mes-
sage in the display.
The current setting is highlighted.
Use the æ or ç button to select
the language in which the operating
system messages are to be displayed.
You can select:
German (Deutsch)
British English
American English
French
Italian
Spanish
Selecting the display for the status line
Select the
Inst. cluster
submenu us-
ing the æ or ç button.
Press the j or k button repeat-
edly until you see the
Select displ.
message in the display.
The current setting is highlighted.
Press the æ or ç button to se-
lect whether to display the outside
temperature or the speed.
The selected display is then shown per-
manently in the bottom part of the dis-
play.
Selecting the unit for the tire pressure
Select the
Inst. cluster
submenu us-
ing the æ or ç button.
Press the j or k button repeat-
edly until you see the
Tire pres.
mes-
sage in the display.
The current setting is highlighted.
Press the æ or ç button to se-
lect the unit for the tire pressure:
bar
or
psi
.
N54.32-2259-31
N54.32-2260-31
N54.32-2261-31
To Next Page
Loading...
