319
Practical hints
Replacing the wiper blades
5
Replacing the wiper blades
Apply the handbrake ( page 115).
1 Wiper blade
2 Retaining clips
3 Wiper arm
Fold the wiper arms away from the
windshield.
Press two retaining clips 2 together in
the direction of the arrow and fold wip-
er blade 1 away from wiper arm 3.
Pull wiper blade 1 up and out of the
retainer.
Slide wiper blade 1 into the retainer
on the wiper arm.
Press wiper blade 1 onto wiper
arm 3 until you hear retaining clips 2
engage.
Fold wiper arm 3 onto the windshield
again.
!CAUTION
Do not open the hood while the wiper
arms are folded away from the wind-
shield. You would damage the hood
and the wiper arms.
Do not fold the wiper arms onto the
windshield without wiper blades being
attached. You could scratch the wind-
shield.
For your own convenience, have this
work carried out at an authorized
Sprinter Dealer.
Removing the wiper blades
Warning G
When the windshield wipers are set to inter-
mittent wipe or the rain sensor is active, the
windshield wipers could move at any time
and injure yourself or others upon contact
with them.
Always remove the key from the ignition
lock before replacing the wiper blades.
Installing the wiper blades
To Next Page
Loading...
