105
Controls in detail
Operating system with steering wheel buttons*
3
Press the æ or ç button to se-
lect how the radio should tune into a
station.
Frequency
: The nearest station on
the waveband is selected
Memory
: The nearest saved station is
selected
Setting the windshield wiper sensitivity
You can use the
Wipe sensor
function to
set the sensitivity of the rain sensor.
Press the è or ÿ button repeat-
edly until you see the
Vehicle
message
in the display.
Press the j or k button repeat-
edly until you see the
Wipe sensor
mes-
sage in the display.
The current setting is highlighted.
Press the æ or ç button to
select the level of sensitivity of the rain
sensor.
Level 1
: High sensitivity
Wiping beings in light rain
Level 2
: Moderate sensitivity
Level 3
: Low sensitivity
Wiping only begins in heavy rain
Convenience submenu
*
You can reach the
Convenience
submenu
via the
Settings
menu ( page 96).
Key-dependent settings
You can use the
Key
function to determine
whether the settings in the:
Instrument cluster
Lighting
Vehicle
submenus are stored as key-dependent
settings.
Press the è or ÿ button repeat-
edly until you see the
Convenience
mes-
sage in the display.
Press the j or k button repeat-
edly until you see the
Key
message in
the display.
The current setting is highlighted.
N54.32-2271-31
N54.32-2272-31
N54.32-2273-31
To Next Page
Loading...
