159
Controls in detail
Transporting
3
Secure tilt and tip-resistant loads in all
directions by using the lashing points
or lashing eyes and load rails in the
load compartment or on the load sur-
face, according to your vehicle's equip-
ment.
Only use lashing materials that have
been tested according to valid stan-
dards, such as lashing nets and straps.
Always use the lashing points closest
to the load for securing it in place and
place padding around sharp edges.
Example illustration of crewbus
1 Lashing eyes
Example illustration of panel van
1 Lashing eyes
2 Load rails*
i
Lashing materials that comply with val-
id standards can be obtained in any
specialist shop or from an authorized
Sprinter Dealer.
If possible, use the lashing eyes when
securing a load, especially if it is heavy.
To Next Page
Loading...
