Dodge 2007 Sprinter - Page 303

302
Practical hints
Where will I find...?
5
3 Securing hook
4 Sleeve
5 Spare wheel bracket
 Raise spare wheel bracket 5 slightly
and release left securing hook 3.
 Slide the pump lever for the jack into
sleeve 4 on spare wheel bracket 5.
 Raise spare wheel bracket 5 using the
pump lever and release right securing
hook 3.
 Slowly lower spare wheel bracket 5 to
the ground.
 Raise spare wheel bracket 5 slightly
and pull the pump lever out of sleeve
4.
 Use the pump lever to raise the spare
wheel beyond the rear end of the spare
wheel bracket.
 Carefully remove the spare wheel from
the bracket.
Chassis
Example illustration of chassis
1 Securing hook
2 Fixing nuts
3 Thumb nuts
4 Spare wheel bracket
 Loosen thumb nuts 3 by hand and re-
move.
 Loosen fixing nuts 2 to the thread
end.
 Raise spare wheel bracket 4 slightly
and release left securing hook 1.
 Slide th pump lever for the jack into
sleeve on the right-hand side of the
spare wheel bracket 4.
Warning G
Take care not to trap your fingers when you
lift out the spare wheel.