Dodge 2007 Sprinter - Page 312

311
Practical hints
Changing bulbs
5
6 Tail lamp
7 Rear foglamp (driver’s side)
8 License plate lamp
9 Reverse lamp
 Switch off the lighting.
 Undo screws 1 and remove lens 2.
 Press the bulb into the bulb holder and
screw it out in a counterclockwise di-
rection.
 Press the new bulb into the bulb holder
and screw it in clockwise.
 Replace lens 2 and retighten
screws 1.
 Switch off the lighting.
Identification lamps W 5 W (cab chas-
sis only)
 Switch off the lighting.
 Undo screws 1 and remove lamp hou-
sing.
 Turn the bulb holder 2and remove it
together with the bulb.
 Pull the bulb out of the bulb holder 2.
 Press the new bulb into the bulb holder
2.
 Screw the bulb holder 2 containing
the bulb into the lamp housing.
 Carefully reattach the lamp housing
and retighten screws 1.
Changing additional bulbs
1 Securing screws
2 Bulb holder