314
Practical hints
Changing bulbs
5
Interior lamp K18W
Interior lamp
1 Lamp housing
2 Festoon lamp
Switch off the lighting.
Press in the latching springs of lamp
housing 1 using a suitable tool, for ex-
ample a screwdriver.
Pry off lamp housing 1.
Remove bulb 2 from the bulb holder.
Insert new bulb 2.
Align lamp housing 1 on the right and
engage it.
N82.20-2079-31
!CAUTION
Have the interior lamps in the overhead
control panel changed at an authorized
Sprinter Dealer which has the neces-
sary specialist knowledge and tools to
carry out the work required.
The manufacturer recommends that
you use an authorized Sprinter Dealer
for this purpose.
You could damage the overhead con-
trol panel.
To Next Page
Loading...
