341
Practical hints
Jump-starting
5
Using red positive terminal clamp 1 of
the jumper cable, slide the red protec-
tive cap of the jump-starting connec-
tion point back with a clockwise turn
and connect the positive terminal
clamp of the jumper cable to the posi-
tive terminal of the jump-starting con-
nection point.
1 Positive terminal of jump-starting con-
nection point (under cover)
2 Positive terminal of donor battery
3 Negative terminal of donor battery
4 Ground contact of own vehicle
(negative terminal of your own battery)
Run the other vehicle’s engine at idling
speed.
Connect negative terminal 3 of the
donor battery to ground contact 4 of
your own vehicle.
Start with the donor battery.
Start the engine.
Disconnect the jumper cable from neg-
ative terminal 3 of the battery and
ground contact 4 first, then from pos-
itive terminal 2 of the battery and
jump-starting connection point 1.
The red protective cap springs back to
its initial position when the terminal
clamp is removed from the jump-start-
ing connection point.
Have the battery checked at an
authorized Sprinter Dealer.
Use a rigid towing bar and secure this only
to the front towing eye ( page 342).
i
Do not connect the jumper cable to the
auxiliary battery* in the engine com-
partment. This is not suitable for jump-
starting operations.
Tow-starting
!CAUTION
Your vehicle is equipped with an auto-
matic transmission. Do not tow-start
your vehicle.
Warning G
When tow-starting another vehicle, its
weight should not be greater than the per-
missible gross weight of your vehicle.
To Next Page
Loading...
